EDPS2018 Differential
Pressure Controller
EST-1011DT / DTH Series
Air Conduit Temperature / Humidity Transmitter
EST-1011RTH Series
RoomTemperature /
Humidity Transmitter
EST-1011PTA/B Series
Water Pipe Temperature
Transmitter
| EDPS-21, 22, 23 Differential Pressure Switch |
|
 |
Clogged Filter Detection |
|
Proof of Airflow Needed |
|
Max Pressure/Airflow Control for variable |
|
Volume Systems |
|
Visible scale reading for easy set point adjustment |
|
External set point adjustment without removing cover |
| EFS22 Water Flow Switch | |
|
1” to 6” pipe size |
|
3 pieces paddle included |
|
SPDT contact for NC or NO operation |
| EFP24 Frost Protector | |
|
mainly used when temperature drops lower than the set point |
|
The contact of the breaker will operate automatically to protect hot water coil pipes |
|
Cold water coil pipes and other liquid pipes |
| EDPS2018 Differential Pressure Controller | |
|
Single Pole, Double Throw floating action control |
|
1/4” Flare Tube connection for easy installation |
|
Visible scale reading for easy set point adjustment |
|
External Set point adjustment without removing cover |
| EST1011T Temperature Sensor | |
|
Sensor is applicable with ETC series proportional-plus-integral (PI) controller |
|
For a variety of heating and cooling applications controlled by water valves and damper actuator |
| EST-1011DT / DTH Series Air Conduit Temperature / Humidity Transmitter | |
|
The EST-1011DT/DTH Series line offer an economical solution for a wide variety of temperature sensing needs, in the cooling heating, ventilation and air conditioning application field |
| EST-1011RTH Series RoomTemperature / Humidity Transmitter | |
|
The EST-1011RTH Series of transmitters provides a passive or active signal that corresponds with the air or water temperature in heating, ventilation and air conditioning application field |
| EST-1011PTA/B Series Water Pipe Temperature Transmitter | |
|
The EST-1011PTA/B Series of transmittersis usded to measure the liquid temperature in pipes or the air temperature in heating, ventilation and air conditioning application field |
| EMPT Micro-differential Pressure Transmitter | |
|
0-10VDC Proportional output |
|
Increasing/decreasing in the mass air flow |
|
3 Wire cable |
|
Max Pressure 500mbar |
|
Accuracy: 0-0.1mbar |
